iPhone 11 Series Stuck On Apple Logo? Here’s A Working Fix

Any of the newly launched iPhone flagships, like prior iPhones, can become stuck and stop operating. Stuck problems or random to frequent unresponsiveness in older devices are typically related to memory issues, specifically a device’s diminishing memory. In the worst-case scenario, the symptoms are caused by a faulty component.

Fortunately, stuck difficulties with new gadgets are mainly software-related. This suggests that the problem can be solved at home by implementing the appropriate remedies. If you run into a similar problem with your new iPhone, I’ve mapped out a few simple remedies to assist you to analyze and eliminating software-related variables that caused your device to stop working and become stuck.
So, this post will guide you step by step on how to resolve the issue of your iPhone 11 when it is stuck on the Apple Logo. Let’s get started.

So, How Can You Resolve This Screen Stuck On Apple Issue? Here’s A Fix

Here, we will be discussing the solutions to solve the issue of stuck iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max on the Apple logo in detail.

1. Force Restart Your iPhone 11

A force restart is another way to restart a frozen iPhone. It compels your frozen or unresponsive iPhone to shut down and restart, as the name says. When it comes to beneficial results, a force restart is similar to a soft reset. A force restart can resolve a variety of system difficulties, ranging from a glitching application to small system crashes. All of this may be done without damaging any saved data on your iPhone’s storage. As a result, this is the first advised option that you should try.

Step-1 Press and release the Volume Up key quickly.
Step-2 Press and release the Volume Down key quickly.
Step-3 When you see the Apple logo, press and hold the Side button for around 10 seconds before releasing it.

Steps To Restart Your iPhone 11 Pro

Again, the simplest and easiest recommendation to resolve the same issue on 11 Pro is to restart it, if there is a small bug or anything that is causing this issue, it can be solved immediately. Let’s see the steps to restart the iPhone 11 Pro.

Step-1 Press and release the Volume Up key quickly.
Step-2 Press and release the Volume Down key quickly.
Step-3 When you see the Apple logo, press and hold the Side button for around 10 seconds before releasing it.

Steps To Restart iPhone 11 Pro and 11 Pro Max

Again, the simplest and easiest recommendation to resolve the same issue on 11 Pro and 11 Pro Max is to restart it, if there is a small bug or anything that is causing this issue, it can be solved immediately. Let’s see the steps to restart the iPhone 11 Pro and 11 Pro Max.

Step-1 Press and release the Volume Up key quickly.
Step-2 Press and release the Volume Down key quickly.
Step-3 When you see the Apple logo, press and hold the Side button for around 10 seconds before releasing it.

You can also update your iPhone to the latest version, and also update the installed apps, If available, update apps and iOS to the most recent version. Installing the most recent iOS version for your iPhone will assist in resolving random system crashes that finally lead to a problem with a stuck display. If your iPhone boots up successfully after a hard restart, you should go ahead and check for any pending software updates. To do so, navigate to the Settings-> General-> Software Update menu. If a new update is available, download and install it by following the on-screen instructions. Aside from iOS updates, any pending app updates must also be installed. Don’t forget to restart your iPhone after you’ve updated it.

Also, see- How To Add Someone To Group Text On iPhone Easily

2. Restore your iPhone 11 in iTunes through Recovery Mode

A recovery mode restore is generally required to resolve significant iOS issues that cannot be resolved by a factory reset. This restoration will reboot your device, allowing iTunes to wipe and fix any damaged system components. The biggest disadvantage is that this operation will erase all saved data on your iPhone storage, so backup files are required. If you want to troubleshoot further and use this method, follow these steps:

Step-1 Use the original USB or Lightning cable that comes with your iPhone to connect it to a computer.

Step-2 Open iTunes on a Windows or previous Mac machine, or the Finder on a Mac running macOS Catalina.

Step-3 Quickly push and release the Volume Up key while your device is connected.

Step-4 Then push and release the Volume Down key fast.

Step-5 Then, hold down the Side button until the Connect to iTunes or recovery mode screen appears. If you see the Apple logo, don’t let go of the button since you’ll need to restart your phone into recovery mode.

Step-6 Continue with the rest of the steps to restore and reinstall the firmware on your iPhone through iTunes.

Restore your iPhone 11 Pro and 11 Pro Max in iTunes through Recovery Mode

Again, to resolve this issue on 11 Pro and 11 Pro Max, you will have to perform the same steps that you performed on iPhone 11.

Step-1 Use the original USB or Lightning cable that comes with your iPhone to connect it to a computer.

Step-2 Open iTunes on a Windows or previous Mac machine, or the Finder on a Mac running macOS Catalina.

Step-3 Quickly push and release the Volume Up key while your device is connected.

Step-4 Then push and release the Volume Down key fast.

Step-5 Then, hold down the Side button until the Connect to iTunes or recovery mode screen appears. If you see the Apple logo, don’t let go of the button since you’ll need to restart your phone into recovery mode.

Step-6 Continue with the rest of the steps to restore and reinstall the firmware on your iPhone through iTunes.

3. Restore your iPhone 11 in iTunes through DFU mode

The final probable remedy is to put your iPhone in DFU, or Device Firmware Update mode. This will place your device in an advanced state, where it will still be able to interact and sync with iTunes even if the bootloader is not activated. While this procedure is likely to yield good results in terms of repairing severe system difficulties caused by corrupt iOS, it will also result in permanent data loss. If you don’t mind losing all of your saved data and are anxious to troubleshoot further, follow the instructions below to put your iPhone 11 in DFU mode and restore iOS using iTunes.

Step-1 Connect your iPhone to your computer, then open iTunes or Finder.

Step-2 While your device is connected, press and release the Volume Up button quickly.

Step-3 Then, press and release the Volume Down button quickly.

Step-4 Finally, press and hold the Side button on your iPhone until the screen goes black.

Step-5 When the screen goes black, continue to hold the Side button and then hit the Volume Down button.

Step-6 Keep both buttons pressed for 5 seconds.

Step-7 Release the Power button after 5 seconds but continue to press the Volume Down button for another 10 seconds.

Step-8 Now, after waiting for a couple of minutes, you will be able to read some information on the screen, you have to follow those instructions to restore your iPhone11.

Now, your iPhone will be restored through DFU mode, it will again start the booting process and now there will be no stuck logo on your iPhone11.

Also, see- How To Fix Stuck Apple Logo on iPhone XR

 Restoring Your iPhone 11 Pro and 11 Pro Max in iTunes Through DFU Mode

However, there are some situations that a recovery mode restores will not be able to remedy. And it is at this point that a DFU mode restoration is required. The deepest type of system restore performed on an iPhone or iPad is a Device Firmware Update or DFU mode restore. During this process, your device will be placed in a state where iTunes can still access and communicate with iOS even if the bootloader is not activated. This is generally required to resolve numerous issues caused by a corrupted iOS. However, there is a caveat. If the device has liquid damage, performing a DFU mode restoration is not suggested because there is a larger possibility that the process will fail. If you are enough daring to take this big risk then, you should enable the DFU mode on your iPhone.

Step-1 Connect your iPhone to your computer, then open iTunes or Finder.

Step-2 While your device is connected, press and release the Volume Up button quickly.

Step-3 Then, press and release the Volume Down button quickly.

Step-4 Finally, press and hold the Side button on your iPhone until the screen goes black.

Step-5 When the screen goes black, continue to hold the Side button and then hit the Volume Down button.

Step-6 Keep both buttons pressed for 5 seconds.

Step-7 Release the Power button after 5 seconds but continue to press the Volume Down button for another 10 seconds.

Step-8 Now, after waiting for a couple of minutes, you will be able to read some information on the screen, you have to follow those instructions to restore your iPhone11 Pro and iPhone11 Pro Max.

Now, your iPhone will be restored through DFU mode, it will again start the booting process and now there will be no stuck logo on your iPhone11 Pro and iPhone11 Pro Max.

Also, see- How To Scroll on MacBook Air M1

Wrapping Up!

We hope, by now you have understood all the solutions for iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max stuck on the Apple logo. Try out these solutions if you ever face this issue with the help of this article. If you have some questions left on your mind, you can surely ask us any question we would be happy to help you in any way.

Till then Happy Learning!